March Special: 2008 Fuji Dart 4300s

Glunz & Jensen InterPlater 85HD

Specifications

Adjustable Temperature (Developer):
68-104° F +/- 0,9° F
Adjustable Temperature (Dryer):
86-131° F +/- 0,9° F
Area Replenishment Amount (Dev):
0-0.066 gal./m² +/- 5%
Area Temperature (Pre-Heat):
392-1292° F
Brushes:
diameter: 2.2"
Capacity:
15.7"-59.1" per minute +/- 5%
Dip Length:
15"
Dip Length To Squeeze Rollers:
17.7"
Features:
high capacity pre-heat unit, pre-wash unit, DevoChamber developing concept with two scrubbing brushes, 10 filter in dev. section, fully automatic replenishment system based on square meter measurement, brush in pre-wash section, circulation in pre-wash (water saving system), automatic cleaning of gum section, easy lift-top cover, heater surveillance and exit table
Filters:
1 x 10"
Gum Distribution:
spray tube and idler roller
Level Control:
yes
Material Length:
12.2"
Material Width:
12.2"-33.5"
Materials:
all current photopolymer plates on the market
Maximum Warm Up Time:
0.8° F per minute
Media Thickness:
0.006"-0.016"
Options:
hand shower for cleaning, standard capacity cooling unit (50/60Hz) high capacity cooling unit (50/60Hz) top lid with re-wash slot, feed table, closed stand, quick fill pump (6-8 l/min), container alarm kit, external optical alarm, brush in wash section, very soft brush in developer section, conductivity control, remote enabling drain connection kit and interface for various platesetters
Physical:
width: 52.2"
height: 51.6
depth: 146" (with exit table)
weight: 1060 lbs
Roller Diameter:
2.1"
Tank Capacity (Developer):
11.2 gal.
Tank Capacity (Gum):
recirculating from container
Tank Capacity (Pre-Wash):
5.81 gal.
Water Supply:
tap water
minimum pressure: 15 psi