| Electrical Requirements: |
imagesetter only
115 VAC/230 VAC, 50/60Hz |
| Imaging System: |
laser diode |
| Internal Punch: |
standard |
| Maximum Image Area: |
29.5"x21.9" (28.9"x21.9" with punch activated) |
| Maximum Imaging Speed: |
1270 dpi: 25.4" per minute
1693 dpi: 19" per minute
2540 dpi: 12.7" per minute
3387 dpi: 9.5" per minute
5080 dpi: 6.3" per minute |
| Maximum Line Screen: |
300 lpi |
| Media Widths: |
11" to 30" (in increments of 1.2") |
| On Line Processor: |
Glunz & Jensen on line processor |
| Output Media: |
4 t0 7 mil RLD-sensitive film, polyester plate or RC paper |
| Physical: |
imagesetter only
width: 59.4"
height: 36.6"
depth: 30.7"
weight: 1120 lbs |
| Repeatability: |
+/- 0.2 mil over 4 consecutive outputs |
| Resolution: |
1270, 1693, 2540, 3387 or 5080 dpi |
| Spot Size: |
20-7.5 microns (resolution dependent) |
| Suggested Film Processors: |
Multiline 34, Omega 30, Mulilink 34 (Herkules OLP) |
| Suggested Poly-plate Processors: |
Multiline 34P, Multilink 34P |
| Suggested RIPs: |
RIP 50, Delta, Harlequin, Xenith |
